.jpg)
USB Type-C 1.4 and PD 3.0 compliant
USB-IF Certified. TID: 875, XID: 5400
Support SOP’ communication
Integrated transceiver (BMC PHY)
Support both structured VDM version 1.0 and 2.0
High integration
Embedded both side Ra resistors
Embedded both side VCONN diodes
Embedded MTP
Different package options:
DFN-6L(HFBP-6L) 2mmx2mm, 0.65mm pitch
DFN-8L 2mmx3mm, 0.5mm pitch
WLCSP-6B, 0.875mmx1.425mm, 0.4mm pitch
Support multiple times programming or fuse lock
Compatible with third party programming tools
Support 2.7V ~ 5.5V operation on VCONN1 and VCONN2 pins
Custom structured VDM writing through CC pin
Slew rate control for BMC signal to reduce EMI
25V high voltage protection on CC, VCONN1 and VCONN2 pins
Support Thunderbolt 3 40Gbps data communication
Support Get Manufacturer Info command
±8 kV HBM ESD on CC, VCONN1 and VCONN2 pins
- HUSB332 Expand all
-
Product Descriptions
HUSB332 is a USB Type-C eMarker for Cable ID applications. It is compliant with USB Type-C Specification Revision 1.4 and USB Power Delivery Specification Revision 3.0. Powered from VCONN1 or VCONN2, HUSB332 can determine to act as SOP’. The built-in MTP can be programmed through CC line or I2C bus so that it will be flexible for in-system programming. The HUSB332 operates over a wide supply range of 2.7 V to 5.5 V. It is available in DFN-6L(HFBP-6L), DFN-8L and WLCSP-6B packages. It is rated over the -40°C to +85°C temperature range.
-
Typical Application Circuit
-
Sample and Order
Order model Descriptions Package Temperature Range Shipping HUSB332_U31A Default USB3.1/USB3.2 gen 2, 1m cable DFN2×2-6L -40°C - 85°C Tape & Reel, 4k 
Apply NowHFBP2×2-6L -40°C - 85°C Tape & Reel, 3k Apply NowHUSB332_U31B Default USB3.1/USB3.2 gen 2, 1m cable DFN2×3-8L -40°C - 85°C Tape & Reel, 4k Apply NowHUSB332_U31C Default USB3.1/USB3.2 gen 2, 1m cable WLCSP-6B -40°C - 85°C Tape & Reel, 3k Apply Now -
Product Features
-
Technical Documents
-
Typical Applications
USB Type-C cable
-
Evaluation Board Kit
HUSB332 demo board: EVB_HUSB332_U31C
