.jpg)
USB Type-C PD Source with PPS Supported
– Compliant with USB Type-C Specification Reversion 2.1
– Compliant with USB PD Specification Reversion 3.1
– Compliance certification, TID:9329；
– EPR certification, TID:9692;
28 V EPR FPDO and EPR AVS Supported
Integrated VCONN Power for eMarker Detection
Integrated N-MOSFET drive with soft start
Multiple DPDM Charging Protocols Implemented
– BC1.2 DCP and Divider 3
– QC2.0, QC3.0, QC4+, AFC, FCP
Up to 35 V Maximum Voltage Rating at USB Type-C Connector Pins
Programmable Constant Voltage and Constant Current Control
Fault Protections including Over-Voltage Protection, Over-current Protection, Short Circuitry Protection, Over-temperature Protection, Under-voltage Protection, CC OverVoltage Protection, DPDM Over-Voltage Protection, Thermal Shut Down.
32-bit MCU with 32 kB MTP Memory
Sleep Mode Supported
±7 kV HBM ESD Rating for all of Type-C Connector Pins
- HUSB362 Expand all
-
Product Descriptions
HUSB362 is designed for a USB Type-C PD Source product. It can support up to multiple PDOs with programmable voltage and current for different applications, such as PPS PDOs, EPR PDOs. All of PDOs are fully compliant with USB PD 3.1 Specification Rev.1.4. Besides, HUSB362 implements DPDM charging protocols. Both D+ and D- pins can be configured to support QC2.0, QC3.0, AFC, FCP, UFCS and divider 3 mode which provide excellent compatibility for the legacy devices. It integrates an GATE driver to enable the VBUS from VIN to protect the devices connected with Type-C connector. Only 300uA operation current is needed for HUSB362 during sleep mode. The high voltage tolerance and protections at CC1, CC2, D+ and D- pins provides more reliability for the system.
-
Typical Application Circuit
-
Sample and Order
-
Product Features
-
Technical Documents
-
Typical Applications
Power Adapter
Car charger
-
Evaluation Board Kit
HUSB362 28 V 5 A EVB
