Hynetek-HUSB280

HUSB280 Expand all

Product Descriptions

The HUSB280 is designed for a USB Type-C DRP product. It can support multiple PDOs with programmable voltage and current for different applications, such as PPS PDOs, EPR PDOs. All of PDOs are fully compliant with USB PD Specification Rev.3.2 Ver.1.1.Besides, the HUSB280 implements DPDM charging protocols for source and sink. Both D+ and D- pins can be configured to support QC2.0/3.0/3+, AFC, FCP,SCP, UFCS and divider 3 mode which provide excellent compatibility for the legacy devices.The HUSB280 integrates two N-MOSFETs, enabling low cost and small size design.The high voltage tolerance and protections at CC1,CC2, D+ and D- pins provide more reliability for the system.

Typical Application Circuit

Sample and Order

Model	Temperature Range	MSL	Package Option	Shipping Option
HUSB280-AAXXX-QN37R	-40°C - 85°C	MSL3	QFN-37L,5mm x 5mm	Tape & Reel, 5k	Apply Now

Product Features

USB Type-C DRP with PD Protocol Supported

– Compliant with USB Type-C Specification Revision 2.4

– Compliant with USB PD Specification Revision 3.2

Integrated 30 V, 21 mΩ N-MOSFETs
Integrated VCONN Power for eMarker Detection
Multiple DPDM Charging Protocols Implemented

– BC1.2 DCP and Divider 3

– QC2.0/3.0/3+, AFC, FCP, SCP, UFCS

Up to 35 V Maximum Voltage Rating at USB Type-C Connector Pins
Programmable Constant Voltage and Constant Current Control
Integrated Dead Battery Function for Power Requesting as SINK
Fault Protections including VIN OCP, FOCP,UVP, OVP, CC OVP, DPDM OVP, OTP and TSD
32-bit MCU with 32 kB MTP Memory
Integrated I2C and UART Module for System Communication
±6 kV HBM ESD Rating for all of Type-C Connector Pins

Technical Documents

Typical Applications

Evaluation Board Kit