The HP1000 is a versatile digital controller designed for high-density, high-efficiency DC-DC power conversion, with PMBusTM Revision 1.2 compliant interface. This device provides advanced power control solutions targeted at isolated and non-isolated DC-DC secondary-side applications, including fullbridge/half-bridge isolated converters, open-loop LLC converters, multi-phase buck converters, etc.
The HP1000 offers extensive programmability of integrated digital compensators, fast input line feedforward, PWM output types and timing, constant current mode, as well as soft-start/stop sequences and synchronization. Additionally, it provides flexible protection features including over-voltage protection (OVP), short-circuit protection (SCP), reverse current protection (RCP), over-temperature protection (OTP), and ensuring a robust power management solution. The HP1000 employs a flexible state machine architecture programmed via intuitive GUI. This userfriendly interface reduces design cycle time while producing a robust, hardware-coded system embedded in the built-in EEPROM. The HP1000 is available in 4 mm x 4 mm QFN-24L.
Versatile Digital Voltage Mode Controller
−40°C to +125°C Operating Temperature
PMBus Revision 1.2 Compliant with PEC and Extended Manufacturer Specific Commands
6 PWM Control Signals with 312.5 ps Resolution
– Programmable Switching Frequency from 50 kHz to 1 MHz
– Multi-segments Soft-start of Duty and Switching Period for Open-loop LLC
– Frequency Synchronization
– Support HiZ Mode
High-speed Voltage Sense
– Independent 50 MHz 11-bit Tracking ADC for Input Voltage and Output Voltage Sense
– Up to 1.6 V Differential Voltage Sense
– Secondary-side Rectified Voltage Sense Capability for VFF
High-speed Current Sense
– 25 MHz Σ-Δ ADC for CS1 and CS2
– Primary-side Cycle-by-cycle Fast over-current Protection
– Secondary-side Cycle-by-cycle Fast overcurrent Protection
– Secondary-side Diode Emulation Mode
Advance control algorithm
– Digital Control Loop with Programmable Loop Filters for CCM, DCM and Low-temperature
– Duty-cycle Double Update
– Fast Line Voltage Feed-forward
– Pre-bias Startup
– Synchronous Rectifier Control in DCM Condition
Auxiliary functions
– 25 MHz Σ-Δ ADC for TSNS, ADDR, VSET
– Accurate Droop Current Sharing
– IMON for Output Current Indicator
– Compatible with NTC Temperature Sense
– Redundant Programmable OVP
– Extensive Fault Detection and Protection
– Up to 4 GPIOs
– Compatible with DOSA Analog Trim
Programming via Easy-to-use Graphical User Interface (GUI)
512 bytes EEPROM for Programming and Data Storage
Available at QFN4x4-24L Packages
Intermediate Bus Converters (IBC)
Isolated DC/DC Power Supplies and Modules
Industrial 4.0 Power Applications
Updates in progress
Updates in progress
Updates in progress